Birch Thing Day4

This morning was a little tedious as it was mostly taken up with wrapping several miles of thread.

The exciting variant here was adding a strand of wire to give 'bendability' when the leaves are suspended.



The other time consuming operation was getting the hanging device to work. Clive is good at this but there was a lot of trial and error involved - his preferred option of mirror fittings were unsuitable on a bumpy surface.

Eyelets took a long time to fix and then we made the top piece of wood all wonky. I hope you are absorbing all these technical terms. Eventually a metal eyelet at the top was agreed so I had to disguise it with yet more wrapped thread. The next task was to paint a few more coloured leaves in case it needed more contrast.

Finally I gathered all my bits and fixed the wrapped wire to the front. An experiment in the form of a strip of organza with a pattern stitch and a fringed edging was added to the mix. You can see it in the front in the pic below. Some little flowers were made from punched shapes in case a frond or two was needed.

Here is the beginning - bending the wire around the slats of wood, the organza is ready to be folded over the cord with the fringe hanging down.

Then the leaves were pinned into place - a mix of metal and gessoed Vilene, with the odd splash of colour. Note the less than elegant hanging device at the top.

A close-up - the leaves look brighter than they really are. I think it needs a few slightly bigger leaves to change the scale a little.

Finally - the story so far. Tomorrow will be a day of leaf making and probably more wrapping. I am still not convinced about the brighter colours but I think the metal and gesso ones look good.


Focal points will need some thought tomorrow, too - it's getting a bit busy.


I am afraid that Smudge has been very boring today It has been lovely and sunny (praise the Lord) so he lay on his back in the conservatory all day. He says he will try to be more Smudge-like tomorrow That's worrying.

Birch Blog Day 3

Many thanks for all your comments - I am enjoying them and I do read them all. Today was something of a consolidation day - putting in some solid work on the birch bark background and making more wrapped thread (more is still needed) and working some extra leaf experiments.

It started with a visit to Phil,the woodworking son in law. Started early, took my daughter.


As expected the WWSIL had just the right coating for the bark and we tried a sample. As it would take a while to dry the girls decided that we would have an outing to the local 'Treasure House'. Imagine ten car boot sales crammed together in a huge warehouse. A very cold warehouse. Both of my girls are treasure hunters - Fiona does vintage and Claire has a good eye for specialised toys which she re-sells.

Much later, lighter in the purse but heavier in the boot, we returned to find the wood dry and looking good. So I stole the spray from the lovely WWSIL and was home in time for lunch, travelling through atrocious conditions - gale force winds and icy rain.


Not a lot of time left after I had sprayed both sides of the birch.

However, I wrapped some thread and then started some experiments on using the die-cutter on flimsy fabrics. I had previously tried this and failed but a new process was discovered, which worked really well. I am going to be mean and keep it under my hat for now as I am writing an article for Workshop on the Web on cutters, so you will see it then.

I wanted some 'flimsy' leaves to contrast with the heavy Vilene and metal ones and this metallic organza is just the thing. It doesn't look very transparent in the photo but it is in real life. They look good with the leaves that I hand and machine stitched last night.

So tomorrow will be a whole day of putting it together. Hopefully it will be well on the way to being finished before the weekend.

Jane Lemon always says that you should leave your workroom clean and tidy to encourage you to make a start the next day. Hmmmn!

Birch Blog Day 2

A big thank you to all who dropped in yesterday. The discussion on the best leaves moved between blog comments and Facebook - mixed social media?

Today did not start well as two home truths were discovered quite early on: there was no food in the fridge and there were several urgent emails that needed attention. I also needed to look at the New Products for the March issue of WoW.  It really was 'Wow' as Sam Packer, who tests all the WoW products, had been playing with her Gelli plate, using some interesting implements. Watching her demo at the Devon show had convinced me to get a Gelli but I shan't play with it yet. This is a sample of her gelling.

By the time those issues had been addressed the morning was almost gone.However, as is often the case, a slow start can mean a fast catch up so I set to work just before lunch to produce reams of wrapped thread to join the pieces of wood together. This was a bit like a jigsaw puzzle and took our combined intellect and a quick lunch to sort out. Clive then drilled the holes, making sure they lined up. With great presence of mind I took a photo before he bore them off to the shed.

Lacing was far from easy and I need to make more wrapped yarn so that I can have some knots in dangling down the front of the work.

I needed to get it all hanging together as I am off to visit the WWSIL (wood-working-son-in-law) tomorrow for some advice on whether to wax or varnish the wood. I shall have to take it to bits again to do that so it is quite loosely held together. I shall also seek advice on the hanging mechanism - mirror plates perhaps, as it is quite heavy.

I spent some time dissolving some water soluble paper on a stamp, drying it and then sticking it onto the bark. the edges were dissolved so it looked like part of the surface. It looks OK - better than the photo above suggests.

I tried some of the leaves - almost everyone liked the first and last pic (many thanks for that confirmation) so I combined the Vilene leaves with the metal ones - see below

.


Looking good, I think and I just about managed to machine embroider two of the leaves which I shall paint tomorrow and see how they look.


Now I am shattered and find myself looking enviously at that cat, fast asleep on the bed.

My cleaning lady thinks that I have trained Smudge to lie on his old dressing gown - she is well impressed. Never having had a cat she does not realise that they learn at their mother's fetlock (I'm sure cats don't have knees) to lay on anything placed on a bed - just in case it is a freshly washed and ironed shirt.

Time to collapse in the chair and work some seeding stitch on the leaves. See you tomorrow.

Birch Blog Day 1

 

Well here I am, as promised on the first day of my ‘make a piece in a week blog’. Today was to be a day of sampling to decide what was going on top of my strips of laced birch bark. As this piece will be in the forthcoming book on cutting techniques I had to use my die cutter with a leaf die. 

I was pretty sure how the wrapped cords should look so I decided to crack on with those first. Then I could lace the strips together and try my samples on the intended background. Knitting yarn, glitzy yarn and suitable top and bobbin threads were gathered and I began.  

The next hour went something like this:

 

Search for piping foot (has a channel underneath and doesn’t squash the cord). Fail.

Feed cat.

Find piping foot in thread box. Begin wrapping. Machine jams.

Search for machine brush for bunged up race. Fail. Borrow Clive’s razor brush.

Feed cat.

Remove sufficient fluff to stuff two cushions. Decide to do proper job and remove lots of machine bits. Clean and oil and re-assemble.

Machine purring nicely, commence wrapping cord.

Listen to Clive and cat discussing cat’s need to be fed – again. Close workroom door.

 

Miles of wrapped cords later I can start the samples.

 Several hours later I have laced some of the strips together and produced a variety of finishes on the cut leaf shapes. Now to try them out.

 It is really not my day. Blogger has just closed me down, luckily I had been saving. It is a little worrying that my Publish button is greyed out.

First sample: metal leaves, embossed and coloured with acrylic paint.

Followed by painted silk applied to Vilene. Too bright, not keen.

Painted Vilene, plus one metal.

Gesso-resisted painted Vilene. Like this.

Brighter version of the one above, plus metal. Ummmm

Mixture of gesso resist, metal and one leaf drawn on paper. I might have one more try tomorrow at replicating the drawn leaf in stitch. Then I will decide.

Which do you think I should use?  Or a mixture? 

 

 

Penance and a Promise

I wrote in the last blog that December had got away from me - well it looks like January went the same way. The problem I have is that I feel so guilty when I don't blog that I lose all desire to do any more. Isn't that silly?  Anyway, to make up for it I am going to post a little bit every day next week and invite you to help me create a new piece of work. Brave, huh? that means that it is almost certain to go wrong.  Here is my idea and it is based on logs.

At the end of last winter we ran out of logs. When we tried to buy more we discovered that most of East Dorset were also out of logs and no-one had any decent ones left. So we were forced to buy some very expensive ones from the company who supplied our burner.

Well they may have cost more than the average but they were beautiful and they burned hot and long. So much so that we decided they were a good buy and bought some more. One or two had quite loose bark and I managed to pull it off. 'It came away in me 'ands, guv!'.

I had a fancy to make something with it, possibly involving the leaf shapes I had been using with my die cutter. It was laid out on the worktable and considered for a while.

Then I made a five minute drawing with a 3B pencil - no time to be fussy, just blocking in texture and tone. I scattered about a few leaves and tendrils that I had cut from paper.

Looked OK so I got out the cutter and cut the tendrils from craft Vilene and leaves from Vilene and metal shim, I plan to back the metal with the Vilene so that I can stitch them.

It will be necessary to join the bark strips so Clive drilled holes in them and I looked over my braiding samples. I think I will use a wrapped cord, although it was good to see the samples again.

Here is a leaf and its backing Vilene - all ready to go,

I will be working through this next week so do please join me on Monday (we have a 'no computers on Sunday' rule in our house). I have a whole week blocked out in the diary so watch this space.

The Return of the Magi - or was it the Maggie?

Ah, there you are. Where have you been? No, wait a moment it is me who went missing but I am back. Everything got away from me in December - we published the Approaches to Stitch book and had so many orders that Fee was under siege and needed help. Then I decided to give away a free class - if you haven't seen Sian Martin's excellent class on observation and drawing go to www.d4daisy.com and find it now. 

I barely had time to get over that when it dawned on me that people expect presents at Christmas time so there was a lot of scuttling about and before I knew it we had broken up for Christmas and it was family time.

Our trips to see Father Christmas on the train have been documented over the years but I really thought they were all getting too big for the train ride to Santa. I proposed a sophisticated evening of Pizza Express followed by the outdoor ice rink in Bournemouth. Howls of protest ensued. Cries of  'It's tradition, Granny', You would think I was selling them into the slave trade. So we went on the train again and it was fun.

Lauren (almost twenty) did decide to forgo the present after last year's Hannah Montanna episode but the big boys held out and actually got very decent board games.

 I must say that the train ride was quite magical and we seemed to go further this year, with a few twists and turns of the track. Then is was back to ours for 'proper' hot chocolate, made with real chocolate and squirty cream.

I had lunch with three of my 'besties' just before Christmas and that was great fun. We are the Crones so we celebrate the Solstice, that way you get four lunches a year! I made cards - see above.

We had quite a crowd for Christmas dinner, to celebrate the fact that we could fit everyone in the conservatory. We even asked my ex and it went off very well. The pic above shows what my friend Adele calls an eclectic mix of chairs. I couldn't set the table properly until just before we were ready as THAT CAT kept jumping up and knocking over my good glasses.

The lovely thing about grown up Gcs is that you get pressies. Lauren bought me a Crochet Hollywood kit and I have had great fun with it. Marilyn, below is almost there.

Here is Elvis. I have got better since I made him with his wonky cummerbund. 

I am now about to publish Ruth Lee's on-line class, free to those who have purchased the book. Same d4daisy addy as above. Also getting ready for Craft4crafters in Devon at the end of the month, so it's back to work with a vengeance. 

We have changed some of the free taster workshops on Workshop on the Web. Have a freebie on us at www,workshopontheweb.com.  

I promise I shall be back soon as I have lots more to say, Keep safe and hopefully dry - Ferndown is almost an island with all the rivers running very high.

Books , Freebies and Belated Comments

Following my last blog, there were some really interesting comments concerning the cutting machines. I had a little difficulty publishing them – sorry about that. I will put them on the end of this post and follow up on some of them.

It’s been a very exciting couple of days with the launch of the 'Approaches to Stitch' book and the December issue of Workshop on the Web. There have been so many book orders already and we’ve been helping to put books in envelopes while trying to keep up with Facebook and the phone.  Now we have handed the book over to Fiona and her gang of helpers so, if you’ve put in an order, it’s on the way.

 I think it is a wonderful book and Karen Platt gave it an excellent review in WoW. The printers have excelled themselves and, if you need any printing, I can recommend The Colour Factory in Sittingbourne, Kent.

Siân Martin has written a brilliant free workshop (whether you buy the book or not) about observing and recording information, which is something that we should all be doing.

 It’s on the d4daisy site – just go to www.d4daisy.com and follow the link from the online classes button. Tell your friends.

I had a really good ‘doing’ week last week, playing with the die cutter. I wanted to make flowery poles, based very loosely on ‘folk art’ - flowery, brightly painted wooden or metal articles.

Mine are stiffened silk and I was going to add a lot of stich but preferred them without when I sampled some. There will be five poles (or possibly three if I run out of time).

Here are the ingredients. I left these lying about and they got ‘Smudged’ and were scattered all over the room. Are we the only daft sods who buy their cat an advent calendar? Smudge has a Dreamies one but he becoming addicted and has to have his treat in the kitchen as he dribbles so much.

Comments.

I had such trouble getting these from my last blog post to publish that I’ve copied and pasted them all below in case they disappear again!

These run from wonky loos to cutting machines and cat nightmares. Thank you all for your thoughts.

Hi Maggie I saw that you had mentioned the Silhouette machine. I have been thinking about buying one and then discovered a new machine the Brother ScanNCut CM100DM which is a cutting machine with a built-in scanner. Looks interesting and easier to use especially with your own drawings. There is talk of it being available internationally in December. You can find  information about it on Amazon.com and videos on You Tube. Sheila. Sheila, I have a contact at Brother and intend to give him a ring as soon as the book work dies down. I always loved the creative possibilities of the scan and stitch machines so this sounds like a must. I think Wabbit is up for this, too. Congrats Amanda! Suztats Prize should be with her soon! It must be so exciting when you see the proofs of a new book for the first time. Your Christmas cards will be mini works of art. Love the loo planter and poor Smudge just needs a bit of homespun therapy. Heather Yes, the proofs are hard to follow and I am always relieved when I get my hands on the book proper and find that the pages run in order. I think the printer’s software probably does this bit. Maggie, yes the Silhouette works well with fabric..... just follow the instructions and it is worth using the fabric blade... if only to ensure that you aren't using a blunt one that has been used for paper and card... much the same as we do with scissors. We were just discussing this in the mixed media class today and decided that the Silhouette seems to be the best for fabric. Hope Mr Smudge has calmed down again by now.  Dorothy Interesting, Dorothy. This machine can be computer linked, too. Good point about the blade for fabric. I've just bought a Silhouette Portrait... as paper is my fabric of choice. Plus I have a Gelli Plate and want to cut my own stencils. So forthcoming book sounds interesting. Poor Smudge, think cats do dream, they sometimes wake with a start, and hiss. Beverley My collaborators (Sam Packer and Paula Watkins) on the cutting book are doing things with stencils and gelli plates and I hope I have time to play that game too. I love using the cutters for collagraphs. Very excited!!!! The things you do for your art, I hope the knees are behaving again now. And the loo looks lovely, I'm sure you're both flushed with success. I hope Smudge is over it all now. Amanda Ho, Ho – very flushed. Just a joy to have a stable loo. Oh No! That’s an opportunity for a gag as well! Yikes, poor Mr Smudge! I wonder if he saw a ghost? Or someone being mean to a cat? Poor baby! Please give him my sympathy. Wabbit Smudge appreciates the sympathy  and says. ‘ Thanks Wabs but I just need more Dreamies.